Molding micanite FMP-SB, FFP-SB, FMPA-SB, FFPA-SB
Molding micanite FMP-SB, FFP-SB, FMPA-SB, FFPA-SB TU 3492-097-05758799-2003
Molding micanite of FMP-SB, FFP-SB, FMPA-SB, FFPA-SB grades is represented by a composite sheet material based on phlogopite or muscovite mica, mica paper and polyester binder.
The sheets are (860±20) mm long, from 500 to 680 mm wide, from 0,25 to 1,5 mm thick.
Application: Molding micanite of FMP-SB, FFP-SB, FMPA-SB, FFPA-SB grades is to apply as moldable when hot electric insulating material for commutator sleeve gaskets, sleeves, tubes, cylinders operating at a temperature up to 155°C.
| Thickness |
Electrical strength, not less, at (15-35) ° С 45-75%, kV / mm | Mass fraction of components,% | ||||||||||
| Grade | 0,15-0,25 | 0,3 | 0,35 | 0,4 | 0,45 | 0,5 | 0,6 | 0,7-1,0 | 1,5 | Binder | Mica | Volatile substances, not more than |
| FMP-SB | 41 | 36 | 36 | 36 | 36 | 36 | 30 | 30 | 30 | 12-20 | 80-88 | 1 |
| FFP-SB | 36 | 31 | 31 | 31 | 31 | 31 | 25 | 25 | 25 | 12-20 | 80-88 | 1 |
| FMPA-SB | 41 | 36 | 36 | 36 | 36 | 36 | 36 | 30 | 30 | 7-12 | 88-93 | 1 |
| FFPA-SB | 36 | 31 | 31 | 31 | 31 | 31 | 25 | 25 | 25 | 7-12 | 88-93 | 1 |